Inter-cell spectrum efficiency improvement technology

Improvement in inter-cell spectrum efficiency is a valuable research topic in mobile communication system, which affects cell edge user experience especially. According to current research results, there are three methods to deal with inter-cell interference to improve inter-cell spectrum efficiency, including inter-cell interference randomization, inter-cell interference cancellation and inter-cell interference coordination. This paper analyzes three important inter-cell spectrum efficiency improvement technologies, soft frequency reuse (SFR), uplink power control, and downlink coordinated multi-point transmission/reception (CoMP), and relative research progress.     

The influence of the geometry of micro-patterned thin films on the effective permeability and resonance frequency by domains development

For the application in high-frequency micromagnetic devices, the permeability and resonance frequency of ferromagnetic components is of high interest. It is dominantly influenced by different factors, the external field and direction and the domain distribution, shape and orientation. By the use of micromagnetic simulation, the domain pattern in films was determined and the effective permeability was calculated. The results of the calculations were compared with the domain shape of patterned microstructures of thin FeCoTaN-films, which were deposited onto oxidised silicon substrates by reactive r.f.-magnetron sputtering by employing 6-in Fe₃₇Co₄₆Ta₁₇ targets. To achieve a high-frequency suitability, the films have to be annealed in a static magnetic field of 50 mT between 400 and 500 °C, which are typical temperatures used in CMOS processes, to induce an in-plane uniaxial anisotropy needed for the high-frequency performance. Magnetic softness was obtained by producing amorphous or nanocrystalline films, and additionally, by aspiring low magnetocrystalline anisotropies for, e.g., certain Fe/Co fractions. The unpatterned films with a lateral dimension of 5×5 mm² were measured in a strip line permeameter in a frequency range up to 5 GHz and exhibited ferromagnetic resonance frequencies between 2 and 2.5 GHz within a low-loss permeability spectrum (low width of imaginary part of permeability). For possible integrations in passive microelectronic components the films were patterned to a few tenths of micrometers by near ultra-violet lithography and plasma beam etching, and then consequently annealed to obtain the static and dynamic magnetic properties. To influence the amount of closure domains, designs were conceived to influence the domain formation by creating additional internal boundaries. As a result, the ferromagnetic resonance frequency and the effective permeability are strongly driven by internal and external boundaries.     

Cladding-ring-equivalent effective index method for analyzing the propagation characteristics of multi-cladding photonic crystal fibers

Cladding-ring-equivalent effective index method (CREEIM) is proposed to analyze the propagation characteristics in the multi-cladding photonic crystal fibers (MCPCFs). The effective indices and dispersions of the step index two and three-cladding structures are calculated with the Sellmeier formula. The accuracy of CREEIM is competitive to the results calculated by the multipole method (MPM). With different structure parameters, the differences between two methods are evaluated with the relative error R_E of effective index and relative difference R_D of dispersion. This method is also used to analyze the mode cut-off and nonlinear characteristics in the three-cladding structure PCFs by calculating the mode effective index n_eff instead of complex mode field distribution.     

Application of carbon materials as counter electrodes of dye-sensitized solar cells

Hard carbon spherule (HCS) has been investigated as a counter electrode for dye-sensitized solar cells. The overall conversion efficiency of the cell reached 5.7%, which is comparable to 6.5% of the counter electrode of platinum-sputtered fluorine-doped tin oxide used in Grätzel-type solar cells under the same experimental condition. It is found that the photovoltaic performance was strongly affected by the specific surface areas of the carbon materials.     

激光加速质子束空间电荷力研究

激光加速器可以输出具有独特品质的质子束,例如μm尺寸、ps脉冲长度和高峰值电流。强流粒子束的空间电荷力效应较强,对面向应用的束流传输提出了挑战。通过二维PIC模拟研究了激光加速后与质子速度接近的电子的影响。采用椭球模型估算空间电荷力的影响,比较不同电荷分布的差异。结果表明每束团质子数超过1010后空间电荷力显著影响质子束传输,甚至严重破坏束流品质。空间电荷力的影响在20 ps后显著减弱,离开靶约1.2 mm。     

Structural transitions under high-pressure in a langasite-type multiferroic Ba3TaFe3Si2O14

The iron containing langasite family compound Ba₃Ta⁵⁷Fe₃Si₂O₁₄ was studied at high pressure up to 30 GPa at room temperature by means of in situ X-ray diffraction, Raman and Mössbauer spectroscopies in diamond anvil cell. Two structural transitions at pressures ∼5 and ∼20 GPa are observed. At ∼5 GPa, the low-pressure trigonal P321 phase undergoes phase transition to the most likely P3 structure as manifested by slight increase in the c/a ratio and by anomalies of the Mössbauer and Raman spectra parameters. At ∼20 GPa, the first order phase transition to monoclinic structure occurred with a drop of unit cell volume by 9%. The appearance of the ferroelectric state at such transitions is discussed in connection with the multiferroic properties.     

Synergetic Spin Crossover and Fluorescence in One‐Dimensional Hybrid Complexes

Hybrid materials integrated with a variety of physical properties, such as spin crossover (SCO) and fluorescence, may show synergetic effects that find applications in many fields. Herein we demonstrate a promising post‐synthetic approach to achieve such materials by grafting fluorophores (1‐pyrenecarboxaldehyde and Rhodamine B) on one‐dimensional SCO Fe^II structures. The resulting hybrid materials display expected one‐step SCO behavior and fluorescent properties, in particular showing a coupling between the transition temperature of SCO and the temperature where the fluorescent intensity reverses. Consequently, synergetic effect between SCO and fluorescence is incorporated into materials despite different fluorophores. This study provides an effective strategy for the design and development of novel magnetic and optical materials.     

Oxygen reduction reaction on Ni3(HITP)2: A catalytic site that leads to high activity

As one kind of metal-organic frameworks (MOFs), Ni₃(HITP)₂ has recently been demonstrated to manifest high oxygen reduction reaction (ORR) performance due to its unique structure and property. However, the origin of the high activity of this experimentally synthesized material remains ambiguous. Herein, we performed detailed theoretical studies on the electrocatalytic ORR of the Ni₃(HITP)₂ monolayer. The calculated results uncover that, in addition to the traditional NiN catalytic site, the H atoms directly bonded to the N atoms can also act as the active site for ORR, with the activity even higher than that of NiN moiety. The relative energy diagrams show that the favorable ORR pathway on all possible active sites is the two-electron reduction mechanism from O₂ to H₂O₂, which is well consistent with the experimental observations. Furthermore, the first-principles molecular dynamics simulations show that Ni₃(HITP)₂ also presents excellent thermodynamic stability.     

Temperature sensing using the spectral interference of polarization modes in a highly birefringent fiber

The spectral interference of polarization modes in a highly birefringent (HB) fiber to measure temperature is analyzed theoretically and experimentally. A tandem configuration of a birefringent delay line and a sensing HB fiber is considered and the spectral interferograms are modelled for the known birefringence dispersion of the HB fiber under test. As the delay line, a birefringent quartz crystal of a suitable thickness is employed to resolve a channeled spectrum. The channeled spectra are recorded for different temperatures and the polarimetric sensitivity to temperature, determined in the spectral range from 500 to 850 nm, is decreasing with wavelength. It is demonstrated that the temperature sensing is possible using the wavelength interrogation, i.e., the position of a given interference maximum is temperature dependent. The temperature sensitivity of the HB fiber under test is −0.25 nm/K and the resolution is better than 0.5 K.     

新型可溶性酞菁的合成和光致发光及电致发光性质

以3(4)-硝基邻苯二腈和对甲氧基苯酚为原料, 经过两步反应合成了α(β)-四(4-甲氧基苯氧基)酞菁锌, 通过谱学方法和元素分析表征了其结构. 比较研究其溶液和旋涂膜的紫外可见光谱、光致发光光谱和固体薄片的光致发光光谱. 并以其旋涂膜为发光层制备了电致发光器件, 研究其电致发光性质. 结果表明, 固态酞菁材料与其溶液的荧光发射波长相比均向长波方向移动了145 nm以上, 而且都有不同程度的宽展. 在固态下β-位取代酞菁荧光发射波长红移的程度比α-位取代酞菁大. 电致发光光谱的发射波长和其旋涂膜的光致发光光谱的发射波长基本一致, 大约在856和862 nm左右. 在固态下酞菁分子排列紧密, 分子间相互作用增强导致了荧光发射波长的巨大红移.